Latest guide How can we build your ancient TV or dumb TV (television) a wise TV, robot TV, golem TV, Automation TV, android TV,cyborg TV, mechanical man TV, bionic woman or man TV by using raspberry pi

Latest guide How can we build your ancient TV or dumb TV (television) a wise TV, robot TV, android TV, Automation TV,golem TV,cyborg TV, mechanical man TV, bionic woman or man TV by using raspberry pi 

how to make traditional TV(television) a smart TV, robot TV, humanoid TV, Automation TV, android TV,cyborg TV, mechanical man TV, bionic woman or man TV by using raspberry pi

Hi, today I am going to teach you how to make traditional TV(television) a smart TV, robot TV, humanoid TV, Automation TV, android TV,cyborg TV, mechanical man TV, bionic woman or man TV by using raspberry pi. In this article we will consider all these types of TV as android TV so don't get confused When I am teaching about the android TV.

If anyone want the ads like this website just click here,

https://publishers.adsterra.com/referral/ffWb6xhXT4

Why android TV have lots of names like smart TV, robot TV, humanoid TV, Automation TV,cyborg TV, mechanical man TV, bionic woman or man Television for the same use as all these TV's can  =

smart TV, robot TV, humanoid TV, Automation TV,cyborg TV, mechanical man TV, bionic woman or man TV all are same, just they have little bit more ability than each other.

They all are similar to android TV.we can consider all this names as Synonyms of Android TV or smart TV.

I also provided how to use the smart TV safely in my previous article to visit it just go at last of my post named as, Smart TV= Tips and tricks

Raspberry pi 

Why we give priority to use  "raspberry pi" to make traditional TV into  Android Televisionfor the same use as all these TV's can =

It's not a nasty idea to form our old non Android TV into an Android one.

Here if you check out the costs of Android televisions you'll find that they're not pretty cheap.

Also buying a replacement one makes this TV a complete waste to urge obviate this problem.

I can easily use an Android TV box that gives most the facilities that real Android TV should have. 

But they're not so pocket friendly also cheaper alternatives aren't so reliable and lots of features are missing on them.

So during this two-part article series let's take a look at our Raspberry Pi for do some tests to seek out.

It ispossible to form an android TV box with it or buying a billboard one may be a good idea so let's get started for this project.

I just go with Raspberry Pi for B which is the latest version and the successor of Raspberry Pi 3 B+ consistent with its specification.

It's more powerful than its predecessor due to that before doing anything we've to feature a heat sink over its system on the chip.

Also I even have used a lover to chill the warmth sink down it's important to mention that Raspberry Pi 4 be what I have right now is the 4 GB RAM variant.

This project may be attainable there in 2gb ram variant additionally anyway for starters.

The procedure is-

We want a 16 GB small Mount Rushmore State card that I foremost formatted into its commonplace settings by using SD card.

For matter then I downloaded heredity OS seventeen (17) from the developer's website.

Which is based on Android 10 afterwards I unzip it and get this fine at that point I utilized Bella nature to streak the picture document onto the memory card.

When the passing is effectively finished I embed the micro SD card into the Raspberry Pi.

For the display I used the micro HDMI to HDMI cable that micro HDMI goes to the Raspberry Pi.

Therefore the HDMI goes to that elevation for the power I use USB type-c link and a 5 volt 2 ampere power connector to control the Raspberry Pi in spite of the fact that it is prescribed to utilize 5 volts 3 ampere power supply yet.

At present I do not have any, so I persist with 5 volt 2 ampere one also I used a wireless keyboard and mouse for the inputs.

After switching on the facility both these lights start blinking and on the screen as you'll see linear choices booting.

When this process has been completed we jump up into this screen.

Here click on next select language, then select timezone a short time later, pick your Wi-Fi name, enter the secret key and snap on interface.

Then next on these windows you don't have to do anything so click on next skip and start respectively "ok".

As you can see the Android is successfully installed right now and drug 10 is running anyway to get the Google Play services on our system.

We have to install G apps on the Raspberry Pi cons tic and developers are recommending PICO G apps which has the bare minimum Google Play functionalities to download the G apps.

I visit the open gaps dot orc and choose army afterwards I select the Android version.

Which in my case is Android 10 then I choose the PICO and click this download button.

When the download is finished I copied this file in three different pen drive next we need a zipper file called "recovery".

I'm copying recovery else and G apps simultaneously into my pen drive ok moving on the Raspberry Pi went to the settings concerning then faucet the build range seven times that truly modify the developer possibility currently.

let’s go to the developer possibility by clicking on the system advanced then developer option here activate the basis access by clicking on root access obviously and choose ads and ADB afterwards turn the local terminal on then I find the terminal from the AB dress immediately.

I am inserting that pen drive into the USB port of the Raspberry Pi.

Wherever I traced the G files named recovery as expected and GFS then on the neighborhood terminal.

I compose SU that decides the super client and press enter now.

We get this proper message click on allow then use this command RPI for recovery "dot Sh".

Currently we have a tendency to get this message that indicates asp era hearth can boot into the recovery mode.

If we have a tendency to begin the machine thus we have a tendency to kind reboot and press ENTER after a couple of seconds.

It reboots and automatically gets us into the TWU RP recovery first swipe the slider to allow the modification to put in the GX press the install button.

Then click on select storage and choose USB OTG as you'll see the 2g files which are located on my pen drive.

Select open gaps armed 10 PICO on the next window here you have to swipe this slider to confirm flash the G apps is installing.

It takes a couple of minutes to put in when the installation is successful.

we'd like to click on wipe then swipe to wipe the T WRP icon can help me to enter into the house screen.

During this window again click on wipe then swipe to factory reset now again click on the TW RP icon to enter into the house screen then click on install select recovery else and swipe to verify flash done now we've to only press reboot system.

That's it the operating system need few time also when this madness is successful.

Setup procedure after boot-

we will undergo all the setup procedure of an Android system after completing the setup we get this error message.

 This message is regarding device registration simply ignore them for currently.

 As a result of we'll solve it later once the setup procedure is completed you may notice that the interface of lineage OS on your esperapipe. 

Basically looks like an android not android TV I'll fix that later however initial solve the Google Play services issue.

Because it perpetually provides notifications to resolve this drawback transfer associate degree application called device ID.

 Which might be found on my website wiki thus here we have a tendency to get the Google service framework code click on that then click on the copy button on this window. 

We want this ID later ok click on the Play Store error message from the notification panel it mechanically redirects our self into this window during this window click on this link can direct America into the device registration page.

 Here you would like to sign up along with your Google account I have done it already. 

So I don't need to do that now paste the Google service framework ID by pressing the Ctrl + B from your keyboard.

 Then click on register after a moment or two the method are going to be completed to verify this scroll down a touch on this web page what's more, you get a number like this currently restart the machine by holding the f5 key from your console.

 When our machine is effectively booted up we tend to still get this notification from Google Play services this issue will simply be serviceable.

 Open the Play Store and click on sign-in once a couple of minutes. 

We get this sign in window now use your user ID and secret that have used throughout the device registration currently this Issue is resolved. 

 The Playstore is additionally operating dead fine let's check it properly by transferring and application. 

I need to download a browser in my system anyway it's downloading at once however we have a tendency to fully forgot one thing to inform you.

 I have not completed the setup of the pie thus I simply click on the house button and move in the house screen from the notification section.

 I even have clicked on this notification that takes me to the setup window again after completing the setup process. 

Which I think is not necessary to explain to you in details because everyone has an android device. 

Everything here is that the s same as that after completing the setup.

 I even have come on to the Play Store and see that the app is downloading after a few of seconds.

 It's successfully downloaded into my machine as I aforementioned before the interface appears like humanoid not humanoid TV to vary this I would like a launcher severals are accessible however I'm mistreatment without delay is TV home launcher that is accessible on Play Store although however I would like to side load it from my pen drive once more another drawback has started when connecting my pen drive the OS can't detect it is missing from the File Explorer — after couple of minutes of researching I noticed that it's another bug of the OS to repair this issue I instantly downloaded Es File Explorer from its official website and install it within the ES File Explorer I found that the pen drive still not properly detected therefore I take away it from the USB port and insert it once more currently it's detected and properly usable therefore I open it and install the launcher when this installation is successful I click on the home button here I get the two options I choose TV home and click on forever that is it if you're thinking that this {can be} Just one launcher that you simply can use then you're fully wrong here is that the bunch of different TV launcher app that you can install on your Raspberry Pi I am putting the link of this RT on my article not properly optimized the pi to take its most performance and Most necessarily immediately we have a tendency to aren’t Using the any enclosure to keep it safe it therefore within the next half we'll description check it out now you can notice that the Android here looks like AN humanoid TV however to properly utilize its options we'd like to side load some additional applications like when television receiver orientation etc you'll be able to get all information of those applications is in the article description then I restart the machine now looking at its interface and features we can say that raspberry pi four will simply convert a standard TV into associate humanoid TV therefore we will say that the Raspberry Pi four has the potential to be used as an associate  android TV box up a nutshell the project is successful but still we haven't installed many useful applications and not properly optimized the pi to take its most performance and most significantly without delay we have a tendency to are not victimization any enclosure to guard it. This is an android system we have installed. 

 So we can install applications as per need, we can use browser, video watching and gaming experience from this as an android TV can do.

 You can connect the internet to raspberry pi by Ethernet port or Bluetooth and Wi-Fi in built. 

If you like this article and you have learned something then, please share this article with more and more people and visit again. We provide  lots of knowledge on this blog.

Join my telegram group for suggestions

You can join my telegram group just searching on telegram "Techpanda 16 fanclub"